True North Camp Co.
Bushcraft knife and wood carving tools in the forest

Bushcraft · Knife Skills

Essential Bushcraft Knife Techniques

A sharp knife and the knowledge to use it safely is the most versatile tool in the woods. These are the techniques that matter most.

9 min read

In bushcraft, the knife is the primary tool. It processes wood for fire, prepares food, builds shelter components, and handles dozens of tasks that would otherwise require specialized gear. But a knife is only as useful as the person holding it — and only as safe.

This guide covers the core techniques that make a bushcraft knife genuinely useful in the field, along with the safety habits that prevent the injuries that send people to the emergency room.

Choosing a Bushcraft Knife

A bushcraft knife should have a full-tang, fixed blade between 4–5 inches long, with a Scandinavian (Scandi) grind or a flat grind. The Scandi grind is particularly well-suited to wood carving because the bevel acts as a natural guide — you can feel when the angle is right.

Carbon steel holds a sharper edge and is easier to sharpen in the field than stainless steel, but requires more maintenance to prevent rust. For beginners, a high-carbon stainless steel like 1095 or Mora's carbon steel is a good balance. The Mora Garberg and Mora Companion are excellent starting points at very different price points.

The Blood Circle and Safe Knife Handling

Before drawing your knife, establish your blood circle: extend your knife arm fully and rotate 360 degrees. Anyone within that radius is too close. This habit prevents the most common camp knife accidents.

Always cut away from your body. Always know where the blade will go if it slips. Never use your thigh as a cutting board. When passing a knife to another person, offer the handle — never the blade.

Keep your knife sharp. A dull knife requires more force, which means less control and more likelihood of slipping. A sharp knife cuts where you direct it. Sharpen before every trip and touch up in the field as needed.

Batoning: Splitting Wood with a Knife

Batoning is the technique of using a stick to drive your knife through a piece of wood, splitting it into smaller pieces for fire. It's controversial in some circles — purists argue it's hard on knives — but a full-tang knife with a thick spine handles batoning without damage.

Place the knife blade on the end grain of the wood you want to split. Strike the spine of the blade with a baton (a sturdy stick, roughly wrist-diameter) to drive the blade through. Work from the outside edge toward the center for more control.

Batoning is most useful for splitting larger pieces of wood into fine kindling when you don't have a hatchet. It's not a substitute for a proper splitting tool on large logs, but for kindling-sized pieces it's fast and effective.

Feather Sticks

A feather stick is a piece of dry wood with thin curls of wood shaved along its length, still attached at the base. The curls catch a spark or flame easily and burn long enough to ignite kindling. Making good feather sticks is one of the most useful and satisfying knife skills in bushcraft.

Use dry, straight-grained softwood — pine, cedar, or basswood work well. Hold the stick firmly and draw the knife blade along the wood at a shallow angle, curling thin shavings without detaching them. The goal is thin, translucent curls that stay attached. Work around the stick, creating curls on multiple sides.

The technique improves dramatically with practice. Your first feather sticks will be thick and chunky; after a few sessions, you'll be making paper-thin curls that catch a spark directly.

Notch Carving

Notch carving is used to create the notch in a bow drill fireboard, to make pot hangers, to create joints in shelter construction, and dozens of other tasks. The basic technique is the stop cut: make a perpendicular cut into the wood to define the end of the notch, then slice toward the stop cut to remove material.

For the bow drill notch specifically: after burning in your socket, cut a V-shaped notch from the edge of the board to the center of the socket. The notch should be about 1/8 of the circle. Use the stop cut technique — one cut defining each side of the V, then remove the material between them.

Keeping Your Knife Sharp in the Field

Carry a small sharpening stone — a pocket whetstone or a ceramic rod. For a Scandi grind, lay the bevel flat on the stone and work in circular motions or straight strokes toward the edge. The flat bevel makes this intuitive: when the bevel is fully in contact with the stone, the angle is correct.

Test sharpness with the paper test (the blade should slice cleanly without tearing) or the arm hair test (it should shave hair without dragging). A sharp knife is a safe knife.

Continue Reading

Buying Guide

Best Camping Knives of 2026

Read guide
Fire Craft

Bow Drill Fire: A Step-by-Step Beginner's Guide

Read guide
Shelter

How to Build a Debris Hut

Read guide